Hydraulic rotators for log grapples
The hydraulic rotator BINI HCS for log grapples can be used on excavators, cranes and loaders for the continuous rotation of agricultural-forestry clamps, bucket grapples, clamshell buckets and log grapples.
The materials used are: hardened and tempered steel C45 (according to UNI EN 10083) for the output shaft and ductile cast iron EN-GJS-500-7 (according to UNI EN 1563) for other moulded components.
The hydraulic rotators of this wide range, and its components are manufactured and assembled completely in our factory of Marzabotto. This guarantees an average delivery within 24 – 48 h.
T.1 360°
The hydraulic rotator for log grapples BINI HCS T.1 360° is designed to achieve a torque of 350 Nm at a pressure of 250 bar (25 MPa) and to support an axial load of 10 kN (1000 kg). The rotation is bidirectional …
more details
T.2,5 360°
The hydraulic rotator for log grapples BINI HCS T.2,5 360° is designed to achieve a torque of 760 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 25 kN (2500 kg). The rotation …
more details
T.2,5 F 360°
The hydraulic rotator for log grapple BINI HCS T.2,5 F 360° was designed to achieve a torque of 760 Nm at a pressure of 200 bar (20 MPa) and withstand an axial load of 25 kN (2500 kg). The rotation …
more details
T.3 S 360°
The hydraulic rotator for log grapples BINI HCS T.3 S 360° is designed to achieve a torque of 800 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 30 kN (3000 kg). The …
more details
T.3 SF 360°
The hydraulic rotator for log grapples BINI HCS T.3 SF 360° is designed to achieve a torque of 800 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 30 kN (3000 kg). The …
more details
T.4,5 S 360°
The hydraulic rotator for log grapple BINI HCS T.4,5 S 360° was designed to achieve a torque of 1050 Nm at a pressure of 200 bar (20 MPa) and withstand an axial load of 45 kN (4500 kg). The rotation …
more details
T.4,5 SF 360°
The hydraulic rotator for log grapples BINI HCS T.4,5 SF 360° is designed to achieve a torque of 1050 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 45 kN (4500 kg). The …
more details
T.6 S 360°
The hydraulic rotator for log grapples BINI HCS T.6 S 360° is designed to achieve a torque of 1590 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 60 kN (6000 kg). The …
more details
T.6 SF 360°
The hydraulic rotator for log grapples BINI HCS T.6 SF 360° is designed to achieve a torque of 1590 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 60 kN (6000 kg). The …
more details
T.10 SF 360°
The hydraulic rotator for log grapples BINI HCS T.10 SF 360° is designed to achieve a torque of 2200 Nm at a pressure of 200 bar (20 MPa) and to support an axial load of 100 kN (10000 kg). The …
more details
