The hydraulic rotator for ferrous material grabs BINI HCS T.6 PIST. 360° is designed to achieve a torque of 680 Nm at a pressure of 180 bar (18 MPa) and to support an axial load of 60 kN (6000 kg). The rotation is bidirectional and continuous.
On the 105 mm diameter hardened shaft there is a 35 mm diameter transverse hole where it is possible to insert a pin. Instead the outer moulded body is fixed by fitting no. 6 M16 screws in the 173mm diameter holes. There are also two housings for 16 mm. diameter pins.
ACCESSORIES
3D RENDERING
PRODUCT DIMENSIONAL
